 |
amxuuw00004732
WHEEL HUB, STEERING KNUCKLE INSPECTION
id031100800300
Front Wheel Bearing Excessive Play Inspection
1. Remove the front brake hose bracket from the front upper arm. (See FRONT BRAKE HOSE REMOVAL/INSTALLATION [WITH 4-POT OPPOSED PISTON CALIPER].) (See FRONT BRAKE HOSE REMOVAL/INSTALLATION [WITH SINGLE PISTON FLOATING CALIPER].)
2. Remove the front brake caliper component and suspend it in a place out of the way using a cable. (See FRONT BRAKE DISC REMOVAL/INSTALLATION [WITH 4-POT OPPOSED PISTON CALIPER].) (See FRONT BRAKE DISC REMOVAL/INSTALLATION [WITH SINGLE PISTON FLOATING CALIPER].)
amxuuw00004732
|
3. Remove the front disc plate. (See FRONT BRAKE DISC REMOVAL/INSTALLATION [WITH 4-POT OPPOSED PISTON CALIPER].) (See FRONT BRAKE DISC REMOVAL/INSTALLATION [WITH SINGLE PISTON FLOATING CALIPER].)
4. Install the magnetic base and dial gauge as shown in the figure and measure the front wheel bearing axial excessive play.
amxuuw00004733
|
