DVD/CD PLAYER REMOVAL/INSTALLATION
id092000032100
1. Using the retractable hardtop switch, keep the front roof half-open. (retractable hardtop)
2. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
3. Open the convertible top. (convertible top)
4. Remove the following parts:
- (1) Selector lever knob (AT) (See AUTOMATIC TRANSMISSION SHIFT MECHANISM REMOVAL/INSTALLATION.)
- (2) Shift lever knob (MT)
- (3) Shift panel compartment (See SHIFT PANEL REMOVAL/INSTALLATION.)
- (4) Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)
- (5) Parking brake lever boot panel (See PARKING BRAKE LEVER BOOT PANEL REMOVAL/INSTALLATION.)
- (6) Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)
- (7) Scuff plate (See SCUFF PLATE REMOVAL/INSTALLATION.)
- (8) Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)
- (9) Front seat back bar garnish (See SEAT BACK BAR GARNISH REMOVAL/INSTALLATION.)
- (10) Quarter trim (See QUARTER TRIM REMOVAL/INSTALLATION.)
- (11) Wind blocker (See WIND BLOCKER REMOVAL/INSTALLATION.)
- (12) Roof hook lever (See ROOF HOOK REMOVAL/INSTALLATION.)
- (13) Back trim (See BACK TRIM REMOVAL/INSTALLATION.)
5. Remove the nuts.
6. Disconnect the connector.
7. Remove the DVD/CD player.
8. To remove the DVD/CD player bracket, remove the nuts and then remove the DVD/CD player bracket.
9. Install in the reverse order of removal.