ENGINE DISASSEMBLY/ASSEMBLY [L8, LF]
id0110a9800500
1. Remove the transmission from the engine. (See TRANSMISSION REMOVAL/INSTALLATION [M15M-D].)(See TRANSMISSION REMOVAL/INSTALLATION [P66M-D].) (See AUTOMATIC TRANSMISSION REMOVAL/INSTALLATION [SJ6A-EL].)
2. Remove the following parts:
- (1) The clutch unit (MT) (See CLUTCH UNIT REMOVAL/INSTALLATION.)
- (2) The ignition coil (See IGNITION COIL REMOVAL/INSTALLATION [L8, LF].)
- (3) The CMP sensor (See CAMSHAFT POSITION (CMP) SENSOR REMOVAL/INSTALLATION [L8, LF].)
- (4) The power steering oil pump (See POWER STEERING OIL PUMP REMOVAL/INSTALLATION.)
- (5) The fuel distributor and fuel injector (See FUEL INJECTOR REMOVAL/INSTALLATION [L8, LF].)
- (6) The intake-air system (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L8, LF].)
- (7) The exhaust system (See EXHAUST SYSTEM REMOVAL/INSTALLATION [L8, LF].)
- (8) The CKP sensor (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION [L8, LF].)
3. Remove the drive belt auto tensioner .
4. Install in the reverse order of removal.
