ROOF MOTOR REMOVAL/INSTALLATION

id091600809700

1.  Remove the battery cover.

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [L8, LF].)

3.  Remove the following parts:

(1)  Console (See CONSOLE REMOVAL/INSTALLATION.)

(2)  Quarter trim (See QUARTER TRIM REMOVAL/INSTALLATION.)

(3)  Scuff plate (See SCUFF PLATE REMOVAL/INSTALLATION.)

(4)  Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

(5)  Aeroboard (See AEROBOARD REMOVAL/INSTALLATION.)

(6)  Front seat back bar garnish (See SEAT BACK BAR GARNISH REMOVAL/INSTALLATION.)

(7)  Back trim (See BACK TRIM REMOVAL/INSTALLATION.)

(8)  Seat belt upper anchor installation bolt (See SEAT BELT REMOVAL/INSTALLATION.)

(9)  Power retractable hardtop link bracket (See POWER RETRACTABLE HARDTOP LINK BRACKET REMOVAL/INSTALLATION.)

4.  Disconnect the roof motor connector.

5.  Remove the bolts A and washers.

amxzzw00002097

6.  Remove the roof motor bracket.

7.  Remove the bolts B and C.

8.  Remove the roof motor.

9.  Install in the reverse order of removal.