i-stop WARNING LIGHT (AMBER) [SKYACTIV-D 1.5]

id0140z5008700

Purpose, Function

• If the i-stop control inhibits the operation, the i-stop warning light (amber) flashes/illuminates to inform the driver that the i-stop control inhibits the operation.

Construction

• The i-stop warning light (amber) is equipped in the instrument cluster.

am2zzn00004765

• For vehicles with center display, a warning message in the center display is displayed when the i-stop warning light (amber) is illuminated or flashes. For the message content and verification method, refer to the [CENTER DISPLAY]. (See CENTER DISPLAY [WITH CENTER DISPLAY].)

Operation

• The flashing/illumination conditions of the i-stop warning light (amber) are as follows:

i-stop warning light (amber) flashing condition

― Any of the following DTCs are stored:

PCM DTC

• For details on DTCs, refer to [Engine On-board Diagnostic System]. (See ON-BOARD DIAGNOSTIC SYSTEM TEST MODE [PCM (SKYACTIV-D 1.5)].)

TCM DTC

• For details on DTCs, refer to [Transmission/Transaxle On-board Diagnostic System]. (See ON-BOARD DIAGNOSTIC SYSTEM MALFUNCTION DETECTION FUNCTION [TCM (EW6A-EL)].)

DSC HU/CM DTC

• For details on DTCs, refer to [Brake On-board Diagnostic System]. (See ON-BOARD DIAGNOSTIC SYSTEM [DSC HU/CM].)

EPS control module DTC

• For details on DTCs, refer to [Steering On-board Diagnostic System]. (See ON-BOARD DIAGNOSTIC SYSTEM [EPS CONTROL MODULE].)

DC-DC CONVERTER (i-ELOOP) DTC (with i-ELOOP)

• P0A12:00, P1794:00

i-stop warning light (amber) illumination condition

― Any one of the following conditions is met:

• Ignition switched ON (check of i-stop control system)

• i-stop OFF switch is on

• Engine stalls due to driver's operation while engine is stopped by i-stop control

• Communication error to PCM and instrument cluster

• The PCM sends an i-stop warning light (amber) flashing/illumination request to the instrument cluster via CAN communication.