GPS ANTENNA FEEDER INSPECTION
id092000802100
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION.)
2. Remove the following parts:
- (1) Upper column cover (See COLUMN COVER REMOVAL/INSTALLATION.)
- (2) Meter hood (See METER HOOD REMOVAL/INSTALLATION.)
- (3) Instrument cluster (with active driving display) (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)
- (4) GPS antenna (See GLOBAL POSITIONING SYSTEM (GPS) ANTENNA REMOVAL/INSTALLATION.)
- (5) Audio panel No.2 (See AUDIO PANEL No.2 REMOVAL/INSTALLATION.)
- (6) Audio panel No.1 (See AUDIO PANEL No.1 REMOVAL/INSTALLATION.)
- (7) Center display (See CENTER DISPLAY REMOVAL/INSTALLATION.)
- (8) GPS antenna feeder (See GPS ANTENNA FEEDER REMOVAL/INSTALLATION.)
3. Verify that the continuity is as indicated in the table.