|
Monitor item (Definition)
|
Unit/Condition
|
Condition/Specification
|
Action
|
PCM terminal
|
|
DWN SW*2
(Down switch)
|
On/Off
|
• M range, downshift: On
• Other: Off
|
Inspect the selector lever component.
|
1J
|
|
GEAR
|
1/2/3/4
|
1GR: 1
2GR: 2
3GR: 3
4GR: 4
|
Inspect the following PIDs:
SSA/SS1, SSB/SS2, SSC/SS3,
SSD/SS4, SSE_SS5
|
N/A
|
|
HTM_CNT
|
-
|
Indicates number of high oil temperature mode (ATF temperature at 130 °C {266 °F} or more) operations
0-255
|
-
|
N/A
|
|
HTM_DIS
|
km
|
Indicates travel distance after operation of high oil temperature mode (ATF temperature at 130 °C {266 °F} or more)
0-2550 km
|
-
|
N/A
|
|
LINEDES
|
kPa
|
inHg
|
Indicates target line pressure
|
Inspect the following PIDs:
OSS, TFT, TFTV, THOP, TR, TR_SENS, TSS
|
N/A
|
|
LPS
(Pressure control solenoid)
|
A
|
Change current value according to throttle opening angle
|
Inspect the pressure control solenoid.
|
1P, 1T
|
|
MNL SW*2
(M range switch)
|
On/Off
|
• M range: On
• Other: Off
|
Inspect the selector lever component.
|
1N
|
|
OSS
(Output shaft speed)
|
RPM
|
Indicates output shaft speed
• Ignition switch ON: 0 RPM
• Vehicle speed 25 km/h {16 mph}: 200-230 RPM
|
Inspect the VSS.
|
1AX
|
|
SSA/SS1
(Shift solenoid A)
|
%
|
4GR: 99%
• others: 0%
|
Inspect the shift solenoid A.
|
1D
|
|
SSB/SS2
(Shift solenoid B)
|
%
|
1GR at D range: 99%
• Others: 0%
|
Inspect the shift solenoid B.
|
1H
|
|
SSC/SS3
(Shift solenoid C)
|
%
|
1GR/2GR: 99%
• Others: 0%
|
Inspect the shift solenoid C.
|
1L
|
|
SSD/SS4
(Shift solenoid D)
|
On/Off
|
Idling
• P, N position or D (4GR), L (HOLD mode 1GR)*1, M (1GR or 4GR)*2 range: On
• Others: Off
|
Inspect the shift solenoid D.
|
1K
|
|
SSE_SS5
(Shift solenoid E)
|
On/Off
|
• During TCC operation: On
• Others: Off
|
Inspect the shift solenoid E.
|
1O
|
|
TCS*1
(HOLD switch)
|
On/Off
|
• HOLD switch pressed: On
• HOLD switch released: Off
|
Inspect the HOLD switch.
|
1N
|
|
TFT
(Transaxle fluid temperature)
|
°C
|
°F
|
Indicates transaxle fluid temperature
|
Inspect the TFT sensor.
|
1AH
|
|
TFTV
(Transaxle fluid signal voltage)
|
V
|
• ATF 20 °C {68 °F}: 3.4-3.6 V
• ATF 130 °C {266 °F}: 0.4-0.5 V
|
Inspect the TFT sensor.
|
1AH
|
|
THOP
(Throttle position sensor)
|
%
|
• CTP: 12%
• WOT: 75%
|
Inspect the TP sensor.
|
2AT, 2AX
|
|
TR
(Transaxle range)
|
-
|
• P position: P
• R position: R
• N position: N
• D range: D
|
Inspect the TR switch.
|
1AS
|
|
TR_SENS
(TR switch)
|
V
|
• P position: 4.34-4.79 V
• R position: 3.83-4.18 V
• N position: 3.05-3.50 V
• D range: 2.23-2.66 V
|
Inspect the TR switch.
|
1AS
|
|
TSS
(Input/turbine speed)
|
RPM
|
Indicates Input/turbine speed
• Ignition switch ON: 0 RPM
• Idle: 700-800 RPM (P, N position)
|
Inspect the input/turbine speed sensor.
|
1R, 1V
|
|
UP SW*2
(Up switch)
|
On/Off
|
• M range, upshift: On
• Other: Off
|
Inspect the selector lever component.
|
1M
|