NO.1 ELECTRIC POWER STEERING (EPS) WARNING LIGHT DOES NOT ILLUMINATE WITH IGNITION SWITCH AT ON

id060300800800


1	Electric power steering (EPS) warning light does not illuminate with ignition switch at ON.
TROUBLESHOOTING HINTS • EPS warning light circuit malfunction in the instrument cluster • An error originates from the EPS control module, and the "off" signal is generated. - EPS control module malfunction

Diagnostic procedure


STEP	INSPECTION		ACTION
1	• Instrument cluster input/output check mode is started. • Is the EPS warning light illuminate input/output check code 26?	Yes	EPS control module malfunction. Replace the EPS control module. (See EPS CONTROL MODULE REMOVAL/INSTALLATION.)
1		No	EPS warning light circuit malfunction in the instrument cluster. Inspect the instrument cluster. (See INSTRUMENT CLUSTER INPUT/OUTPUT CHECK MODE.)