SPARK PLUG REMOVAL/INSTALLATION [ZJ, ZY]


id011815800400

Caution
•  If a spark plug that is not as specified is installed, engine performance will be deteriorated. Install only the specified spark plug when replacing.

1.  Disconnect the negative battery cable.

2.  Perform the following procedure.

Except U.K. specs.
1.  Remove the fresh-air duct and air cleaner as a single unit. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [ZJ, ZY].)
U.K. specs.
1.  Set the air cleaner cover out of the way. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [ZJ, ZY].)
2.  Remove the fresh-air duct and air cleaner case as a single unit. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [ZJ, ZY].)

3.  Remove the ignition coils. (See IGNITION COIL REMOVAL/INSTALLATION [ZJ, ZY].)

4.  Remove the spark plugs using a plug-wrench.

5.  Install in the reverse order of removal.

Tightening torque
15—22 N·m {1.6—2.2 kgf·m, 12—16 ft·lbf}