PTC (POSITIVE TEMPERATURE COEFFICIENT) HEATER REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER]
id0740a1806900
1. Disconnect the negative battery cable.
2. Remove the side wall. (See SIDE WALL REMOVAL/INSTALLATION.)
3. Remove the shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [F35M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [B65M-R].)
4. Remove the boot panel. (See FRONT CONSOLE COMPONENT DISASSEMBLY/ASSEMBLY.)
5. Remove the front console. (See FRONT CONSOLE COMPONENT REMOVAL/INSTALLATION.)
6. Remove the ground and wiring harness clip.
am2zzw00002981
|
am2zzw00002982
|
7. Disconnect the connector and bracket.
am2zzw00002983
|
am2zzw00002984
|
8. Cut the dashboard as shown in the figure.
am2zzw00002985
|
9. Remove the PTC heater.
am2zzw00002986
|
10. Install in the reverse order of the removal.