PTC (POSITIVE TEMPERATURE COEFFICIENT) HEATER REMOVAL/INSTALLATION [MANUAL AIR CONDITIONER]

id0740a2806900

1.  Disconnect the negative battery cable.

2.  Remove the side wall. (See SIDE WALL REMOVAL/INSTALLATION.)

3.  Remove the shift lever knob. (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [F35M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [B65M-R].)

4.  Remove the boot panel. (See FRONT CONSOLE COMPONENT DISASSEMBLY/ASSEMBLY.)

5.  Remove the front console. (See FRONT CONSOLE COMPONENT REMOVAL/INSTALLATION.)

6.  Remove the ground and wiring harness clip.

am2zzw00002996

am2zzw00002997

7.  Disconnect the connector and bracket.

am2zzw00002998

am2zzw00002999

8.  Cut the dashboard as shown in the figure.

am2zzw00003000

9.  Remove the PTC heater.

am2zzw00003001

10.  Install in the reverse order of the removal.