POWER BRAKE UNIT REMOVAL/INSTALLATION

id041100801800

Caution

•  Once the brake switch clearance has automatically been adjusted, it cannot be adjusted again. Therefore, replace the switch with a new one when replacing the power brake unit or performing any procedure that changes the pedal stroke.

1.  Remove the master cylinder. (See MASTER CYLINDER REMOVAL/INSTALLATION.)

2.  Remove in the order indicated in the table.

am2zzw00006714

1	Vacuum hose
2	Joint pin (See BRAKE PEDAL REMOVAL/INSTALLATION.)
3	Nut
4	Power brake unit

3.  Remove the brake switch. (See BRAKE PEDAL REMOVAL/INSTALLATION.)

4.  Install in the reverse order of removal.

5.  After installation, inspect the shift-lock and key interlock.