NEUTRAL SWITCH INSPECTION [MZR 1.3, MZR 1.5]

id0140e6800800

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.3, MZR 1.5].)

2.  Disconnect the neutral switch connector. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [F35M-R].)

3.  Remove the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [F35M-R].)

4.  Verify that the continuity between neutral switch terminals A and B is as indicated in the table.

am2zzw00006061

•  If not as indicated in the table, replace the neutral switch. (See NEUTRAL SWITCH REMOVAL/INSTALLATION [F35M-R].)

Specification

Measured condition

Continuity
Rod pushed
Continuity detected
Except above
No continuity