NEUTRAL SWITCH REMOVAL/INSTALLATION [F35M-R]


id0515a1800700

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.3, MZR 1.5].)

2.  Drain the transaxle oil. (See GENERATOR REMOVAL/INSTALLATION [MZR 1.3, MZR 1.5].)

3.  Remove the neutral switch.

am2zzw00005712

4.  Install the neutral switch (with a new gasket) to the transaxle case.

Tightening torque
20—29 N·m {2.1—2.9 kgf·m, 15—21 ft·lbf}

5.  Add the specified amount of specified transaxle oil. (See TRANSAXLE OIL REPLACEMENT [F35M-R].)

6.  Connect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.3, MZR 1.5].)