CLUTCH PEDAL POSITION (CPP) SWITCH INSPECTION [MZR 1.3, MZR 1.5]

id0140e6801600

1.  Verify that the CPP switch is installed properly.

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.3, MZR 1.5].)

3.  Disconnect the CPP switch connector. (See CLUTCH PEDAL REMOVAL/INSTALLATION [F35M-R].)

4.  Verify that the continuity between CPP switch terminals A and B is as indicated in the table.

am5ezw00006124

•  If not as indicated in the table, replace the CPP switch. (See CLUTCH PEDAL REMOVAL/INSTALLATION [F35M-R].)