OIL SEAL (DIFFERENTIAL) REPLACEMENT [F35M-R]

id0515a1800200

1. Drain the oil from the transaxle. (See TRANSAXLE OIL REPLACEMENT [F35M-R].)

2. Disconnect the drive shaft (LH) from the transaxle. (See DRIVE SHAFT REMOVAL/INSTALLATION [MZR1.3, MZR 1.5].)

3. Disconnect the drive shaft (RH) from the joint shaft. (See DRIVE SHAFT REMOVAL/INSTALLATION [MZR1.3, MZR 1.5].)

5. Remove the oil seals using a screwdriver.

am2zzw00000183

6. Using the SST and a hammer, tap each new oil seal in evenly until the SST contacts the transaxle case.

am2zzw00001659

7. Coat the lip of each oil seal with transaxle oil.

9. Install the drive shaft (RH) to the joint shaft. (See DRIVE SHAFT REMOVAL/INSTALLATION [MZR1.3, MZR 1.5].)

10. Install the drive shaft (LH) to the transaxle. (See DRIVE SHAFT REMOVAL/INSTALLATION [MZR1.3, MZR 1.5].)

11. Add the specified amount and type of oil. (See TRANSAXLE OIL REPLACEMENT [F35M-R].)