AUTOMATIC TRANSAXLE SHIFT MECHANISM INSPECTION
id051800273500
Selector Lever Inspection
1. Turn the ignition switch to the ON position.
2. Shift the selector lever to each position and inspect the selector lever.
-
- (1) Verify that the selector lever can be operated as shown in the figure.
-
- (2) Verify that the selector lever can be operated smoothly and moderately.
-
Selector Lever Illumination Light Inspection
1. Disconnect the selector lever component connector.
- (1) Disconnect the negative battery cable.
-
- (2) Remove the side wall. (See SIDE WALL REMOVAL/INSTALLATION.)
-
- (3) Remove the front console component. (See FRONT CONSOLE COMPONENT REMOVAL/INSTALLATION.)
-
- (4) Disconnect the selector lever component connector.
-
L.H.D.
R.H.D.
2. Verify for continuity between the selector lever component terminal C and D.
-
Shift Lock System Inspection
1. Turn the ignition switch to the ON position.
2. Shift the selector lever to the P position.
3. Inspect the shift lock system.
-
- (1) Verify that the selector lever cannot be shifted from P to other positions when the brake pedal is released.
-
- (2) Verify that the selector lever can be shifted from P to other positions when the brake pedal is depressed.
-
Key Interlock System Inspection
-
Note
-
• The key interlock system is not equipped on some of the R.H.D. models.
1. Turn the ignition switch to the ON position.
2. Inspect the key interlock system.
-
- (1) Verify that the ignition key cannot be turned to the LOCK position when the selector lever is not in the P position.
-
- (2) Verify that the ignition key can be turned to the LOCK position when the selector lever is in the P position.
-
