REAR BUMPER DISASSEMBLY/ASSEMBLY


id091000405600

1.  Remove the ultrasonic sensor. (Vehicles with ultrasonic sensor) (See ULTRASONIC SENSOR REMOVAL.) (See ULTRASONIC SENSOR INSTALLATION)

2.  Remove in the order indicated in the table.

am2uuw00000729

1
Screw A
2
Rear bumper guard
3
Screw B
4
Rear reflector (See Rear Reflector Removal Note.)
5
Rear bumper fascia

3.  Assemble in the reverse order of disassembly.


Rear Reflector Removal Note

1.  Push the tab A in the direction shown by the arrow (1).

adejjw00003273

2.  Pull off the rear reflector from the rear bumper in the direction shown by the arrow (2) and (3).

adejjw00003274

Caution
•  When pulling out the rear reflector, be careful not to damage the tab B.