FRONT DOOR HINGE REMOVAL/INSTALLATION
id091100810200
1. Disconnect the negative battery cable.
2. Remove the following parts:
- (1) Sail garnish (See SAIL GARNISH REMOVAL/INSTALLATION)
- (2) Front side turn light (See SIDE TURN LIGHT REMOVAL/INSTALLATION.)
- (3) Front bumper (See FRONT BUMPER REMOVAL/INSTALLATION.)
- (4) Front combination light (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)
- (5) Side step molding (vehicles with side step molding) (See SIDE STEP MOLDING REMOVAL.) (See SIDE STEP MOLDING INSTALLATION.)
- (6) Front fender panel (See FRONT FENDER PANEL REMOVAL/INSTALLATION.)
- (7) Front door (See FRONT DOOR REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
1
|
Bolt
|
2
|
Front door hinge
|
4. Install in the reverse order of removal.