POWER OUTER MIRROR SWITCH REMOVAL/INSTALLATION [3HB]

id0912004204z3

Note

•  The power outer mirror switch is integrated with the power window main switch.

1.  Disconnect the negative battery cable.

2.  Remove the inner garnish. (driver-side) (See INNER GARNISH REMOVAL/INSTALLATION.)

3.  Remove the front door trim. (driver-side) (See FRONT DOOR TRIM REMOVAL/INSTALLATION [3HB].)

4.  Remove the power outer mirror switch. (See FRONT DOOR TRIM DISASSEMBLY/ASSEMBLY [3HB].)

5.  Install in the reverse order of removal.