PARKING SENSOR BUZZER REMOVAL/INSTALLATION

id092200023900

1.  Disconnect the negative battery cable.

2.  Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

3.  Remove the glove compartment cover. (See GLOVE COMPARTMENT COVER REMOVAL/INSTALLATION.)

4.  Disconnect the connector.

am2zzw00007026

5.  Pull out the parking sensor buzzer in the direction of arrow (2) shown in the figure while pressing the clip in the direction of arrow (1) shown in the figure, detach the clip and bracket, and remove the parking sensor buzzer.

6.  Install in the reverse order of removal.