DTC TABLE [AUTO LEVELING CONTROL MODULE (E)]

DTC TABLE [AUTO LEVELING CONTROL MODULE (E)]

id09027708607b

×: Applicable

—: Not applicable

DTC	System malfunction location	Exterior light warning light	Fail-safe	Drive cycle	Self test type^*1	Memory function	Page
C0061:54	Acceleration sensor initial position learning not completed	Flashing 2Hz	×	—	D	×	(See DTC C0061:54 [AUTO LEVELING CONTROL MODULE].)
C0061:96	Acceleration sensor malfunction	ON	×	—	D	×	(See DTC C0061:96 [AUTO LEVELING CONTROL MODULE].)
U0001:88	Unit communication error (CAN)	—	×	—	C, D	×	(See DTC U0001:88 [AUTO LEVELING CONTROL MODULE].)
U0122:87	Without Mazda M Hybrid • Communication error with DSC HU/CM With Mazda M Hybrid • Communication error with electronically controlled brake unit	ON	×	—	C, D	×	(See DTC U0122:87 [AUTO LEVELING CONTROL MODULE (E)].)
U0416:29	Without Mazda M Hybrid • Error signal received from DSC HU/CM With Mazda M Hybrid • Error signal received from electronically controlled brake unit	ON	×	—	C, D	×	(See DTC U0416:29 [AUTO LEVELING CONTROL MODULE (E)].)
U0416:41	Without Mazda M Hybrid • Error signal received from DSC HU/CM With Mazda M Hybrid • Error signal received from electronically controlled brake unit	ON	×	—	C, D	×	(See DTC U0416:41 [AUTO LEVELING CONTROL MODULE (E)].)
U0416:82	Without Mazda M Hybrid • Error signal received from DSC HU/CM With Mazda M Hybrid • Error signal received from electronically controlled brake unit	ON	×	—	C, D	×	(See DTC U0416:82 [AUTO LEVELING CONTROL MODULE (E)].)
U212A:87	Communication error with light control module (LH)	—	×	—	C, D	×	(See DTC U212A:87 [AUTO LEVELING CONTROL MODULE].)
U212B:87	Communication error with body control module (BCM)	—	×	—	C, D	×	(See DTC U212B:87 [AUTO LEVELING CONTROL MODULE].)
U212D:87	Communication error with light control module (RH)	—	×	—	C, D	×	(See DTC U212D:87 [AUTO LEVELING CONTROL MODULE].)
U2300:54	Configuration data not received from body control module (BCM)	—	×	—	C, D	×	(See DTC U2300:54 [AUTO LEVELING CONTROL MODULE].)
U2300:55	Body control module (BCM) configuration not implemented	—	×	—	C, D	×	(See DTC U2300:55 [AUTO LEVELING CONTROL MODULE].)
U2300:56	Configuration data unmatched with body control module (BCM)	—	×	—	C, D	×	(See DTC U2300:56 [AUTO LEVELING CONTROL MODULE].)
U250A:86	Error signal received from light control module (LH)	—	×	—	C, D	×	(See DTC U250A:86 [AUTO LEVELING CONTROL MODULE].)
U250D:86	Error signal received from light control module (RH)	—	×	—	C, D	×	(See DTC U250D:86 [AUTO LEVELING CONTROL MODULE].)
U3000:42	Auto leveling control module internal malfunction	ON	×	—	C, D	×	(See DTC U3000:42 [AUTO LEVELING CONTROL MODULE].)
U3003:16	Auto leveling control module low power supply voltage input	—	×	—	C, D	×	(See DTC U3003:16 [AUTO LEVELING CONTROL MODULE (E)].)
U3003:17	Auto leveling control module high power supply voltage input	—	×	—	C, D	×	(See DTC U3003:17 [AUTO LEVELING CONTROL MODULE (E)].)

*1 :C: CMDTC self test, D: ODDTC self test