WASHER FLUID-LEVEL SENSOR INSPECTION

id091900801900

1.  Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(E)].)

2.  Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION [(E)].)

3.  Verify that the continuity between the washer fluid-level sensor terminals is as indicated in the table.

am3zzw00030715

amxuuw00004689

•  If not as indicated in the table, replace the washer fluid-level sensor. (See WASHER FLUID-LEVEL SENSOR REMOVAL/INSTALLATION.)