IGNITION COIL REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop]

id011836800200

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

2.  Disconnect the negative battery cable.

3.  Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

4.  Remove in the order indicated in the table.

5.  Install in the reverse order of removal.

am6zzw00003768

1	Plug hole plate bracket
2	Connector
3	Ignition coil