COMBINED SENSOR INSPECTION

id041500801300

Note

•  Vehicles with combined sensor: Applied VIN (assumed)

European (L.H.D. U.K.) specs.

•  JMZ BL12F60# 100001—181415

•  JMZ BL12F70# 100001—181415

•  JMZ BL12Y20# 100001—181415

•  JMZ BL12Z20# 100001—181415

•  JMZ BL12Z50# 100001—181415

•  JMZ BL14F60# 100001—181415

•  JMZ BL14F70# 100001—181415

•  JMZ BL14Y20# 100001—181415

•  JMZ BL14Z20# 100001—181415

•  JMZ BL14Z50# 100001—181415

•  JMZ BLA2A60# 100001—181415

•  JMZ BLA2C60# 100001—181415

•  JMZ BLA2F70# 100001—181415

•  JMZ BLA2G60# 100001—181415

•  JMZ BLA2Y60# 100001—181415

•  JMZ BLA2Z20# 100001—181415

•  JMZ BLA2Z50# 100001—181415

•  JMZ BLA4360# 100001—181415

•  JMZ BLA4A60# 100001—181415

•  JMZ BLA4C60# 100001—181415

•  JMZ BLA4F70# 100001—181415

•  JMZ BLA4G60# 100001—181415

•  JMZ BLA4Y60# 100001—181415

•  JMZ BLA4Z20# 100001—181415

•  JMZ BLA4Z50# 100001—181415

Australian specs.

•  JM0 BL103100 100001—225632

•  JM0 BL10C100 100001—225632

•  JM0 BL10F100 100001—225632

•  JM0 BL10L100 100001—225632

General (R.H.D.) specs.

•  JM6 BL1031*0 100001—225632

•  JM6 BL1051*0 100001—225632

•  JM6 BL10F1*0 100001—225632

•  JM6 BL10L1*0 100001—225632

•  JM6 BL10Z1*0 100001—225632

General (L.H.D.) specs., Arab Gulf Cooperation Council, China

•  JM7 BL04F**# 100001—225632

•  JM7 BL04Z**# 100001—225632

•  JM7 BL12F**# 100001—225632

•  JM7 BL12Z**# 100001—225632

•  JM7 BL14F**# 100001—225632

•  JM7 BL14Z**# 100001—225632

•  JM7 BL22F**# 100001—225632

•  JM7 BL22Z**# 100001—225632

•  JM7 BL24F**# 100001—225632

•  JM7 BL24Z**# 100001—225632

1.  Switch the ignition to off.

2.  Connect the M-MDS to the DLC-2.

am3zzn00002365

3.  Select the following PIDs and inspect the lateral acceleration and yaw rate. (See ON-BOARD DIAGNOSIS [DYNAMIC STABILITY CONTROL (DSC)].)

―  LAT_ACCL (lateral acceleration)

―  YAW_RATE (yaw rate)

(1)  Lateral acceleration inspection

1)  Verify the LAT_ACCL change when the combined sensor is tilted to the left and right.

am3uuw00002733

•  If there is any malfunction, replace the combined sensor.(See COMBINED SENSOR REMOVAL/INSTALLATION.)

Standard

When the sensor is tilted to the right (A):

LAT_ACCL changes positively.

When the sensor is tilted to the left (B):

LAT_ACCL changes negatively.

(2)  Yaw rate inspection

1)  Verify the YAW_RATE change when the combined sensor is rotated to the left and right.

am3uuw00002550

•  If there is any malfunction, replace the combined sensor. (See COMBINED SENSOR REMOVAL/INSTALLATION.)

Standard

When the sensor is rotated to the right (A):

YAW_RATE changes negatively.

When the sensor is rotated to the left (B):

YAW_RATE changes positively.