OIL PRESSURE SWITCH REMOVAL/INSTALLATION [FS5A-EL]

id051721292400

Warning

•  A hot transaxle and ATF can cause severe burns. Turn off the engine and wait until they are cool.

1.  Perform the following procedures.

(1)  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [LF, L5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].)

(2)  Disconnect the negative battery cable.

(3)  Remove the aerodynamic under cover No.2. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.)

2.  Remove in the order indicated in the table.

am8rrw00002453

1	Connector
2	Oil pressure switch
3	Washer

3.  Install in the reverse order of removal.