CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER]
id0740a1807400
1. Disconnect the negative battery cable.
2. Remove the following parts:
- (1) Upper panel (See UPPER PANEL REMOVAL/INSTALLATION.)
- (2) Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)
- (3) Selector lever knob (ATX/CVT) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.) (See CVT (CONTINUOUSLY VARIABLE TRANSAXLE) SHIFT MECHANISM REMOVAL/INSTALLATION.)
- (4) Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)
- (5) Side wall (See SIDE WALL REMOVAL/INSTALLATION.)
- (6) Console (See CONSOLE REMOVAL/INSTALLATION.)
- (7) Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)
- (8) Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)
- (9) Dashboard under cover (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)
- (10) Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)
- (11) Bonnet release lever (See BONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION.)
- (12) Lower panel (See LOWER PANEL REMOVAL/INSTALLATION.)
- (13) Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)
- (14) Audio unit (See AUDIO UNIT REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
|
1
|
Screw
|
|
2
|
Connector
|
|
3
|
Climate control unit
|
4. Install in the reverse order of removal.
