NO.2 MIL ILLUMINATES [ZJ, ZY, Z6]

id0103b1800800

2

MIL ILLUMITATES

DESCRIPTION

The MIL is illuminated incorrectly.

POSSIBLE CAUSE

•  The PCM illuminates for emission-related concern (DTC is stored in the PCM).

•  Instrument cluster malfunction

Note

•  If the MIL blinks at steady rate, misfire condition could exist.

2	MIL ILLUMITATES
DESCRIPTION	The MIL is illuminated incorrectly.
POSSIBLE CAUSE	• The PCM illuminates for emission-related concern (DTC is stored in the PCM). • Instrument cluster malfunction Note • If the MIL blinks at steady rate, misfire condition could exist.

Diagnostic procedure

STEP	INSPECTION	RESULTS	ACTION
1	Connect M-MDS to DLC-2. Retrieve any DTC. Are there any DTCs displayed?	Yes	DTC is displayed: • Go to the appropriate DTC inspection. (See DTC TABLE[ZJ, ZY, Z6].)
1		No	No DTC is displayed: • Inspect the instrument cluster operation. (See INSTRUMENT CLUSTER INSPECTION.)
2	Verify test results. • If normal, return to diagnostic index to service any additional symptoms. (See SYMPTOM DIAGNOSTIC INDEX [ZJ, ZY, Z6].) • If malfunction remains, inspect related Service information perform repair or diagnosis. ― If vehicle repaired, troubleshooting completed. ― If vehicle not repaired or additional diagnostic information not available, replace the PCM. (See PCM REMOVAL/INSTALLATION [ZJ, ZY, Z6].)