ENGINE DISASSEMBLY/ASSEMBLY[L3 Turbo]

id0110b3800500

1.  Remove the engine from the transaxle.

2.  Remove the intake-air system. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION[L3 Turbo].)

3.  Remove the exhaust system. (See EXHAUST SYSTEM REMOVAL/INSTALLATION[L3 Turbo].)

4.  Remove the generator. (See GENERATOR REMOVAL/INSTALLATION[L3 Turbo].)

5.  Remove the starter. (See STARTER REMOVAL/INSTALLATION[L3 Turbo].)

6.  Remove the crankshaft position (CKP) sensor. (See CRANKSHAFT POSITION (CKP) SENSOR REMOVAL/INSTALLATION[L3 Turbo].)

7.  Install in the reverse order of removal.