SPARK PLUG REMOVAL/INSTALLATION[L3 Turbo]

id0118b3800400

Caution

•  If a spark plug that is not as specified is installed, engine performance will be deteriorated. Install only the specified spark plug when replacing.

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION[L3 Turbo].)

2.  Disconnect the negative battery cable.

3.  Remove the charge air cooler. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION[L3 Turbo].)

4.  Remove the ignition coils. (See IGNITION COIL REMOVAL/INSTALLATION[L3 Turbo].)

5.  Remove the spark plugs using a plug-wrench.

6.  Install in the reverse order of removal.