 |
am3zzw00003226
MASTER CYLINDER REMOVAL/INSTALLATION[R.H.D. L3 Turbo]
id041100801354
1. Remove the charge air cooler cover. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION[L3 Turbo].)
2. Remove the charge air cooler. (See INTAKE AIR SYSTEM REMOVAL/INSTALLATION[L3 Turbo].)
3. Remove the insulator. (See EXHAUST SYSTEM REMOVAL/INSTALLATION[L3 Turbo].)
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.
am3zzw00003226
|
|
1
|
Brake fluid level sensor connector
|
|
2
|
Reserve hose
(See Reserve Hose Removal Note.)
|
|
3
|
Brake pipe
|
|
4
|
Nut
|
|
5
|
Master cylinder
|
|
6
|
Reserve tank, cap
|
Reserve Hose Removal Note
1. Disconnect the reserve hose from the master cylinder using a flathead screwdriver as shown in the figure.
am3zzw00003141
|
Reserve Hose Installation Note
1. Insert the reserve hose straight into the master cylinder as shown in the figure.
am3zzw00003142
|
2. Press the clip in after the reserve hose is inserted completely.
3. Pull the reserve hose to verify that it does not come off, and reinsert it completely.
