NO.3 NO SOUND FROM ALL SPEAKERS[ENTIRE AUDIO SYSTEM]


id0903e2803200

3

No sound from all speakers/Possible DTC: 00:Er10, 03:Er07, 03:Er10, 09:Er20, 09:Er21

Troubleshooting hints
•  Speaker malfunction (e.g., foreign material penetration, damage)
•  Audio unit malfunction
•  Short circuit in wiring harness between audio unit and speaker
•  Short circuit inside speaker

Diagnostic procedure

STEP

INSPECTION

ACTION

1
•  Press AUDIO CONT button for 2 second or more.
•  Play the CD or Radio.
•  Adjust the volume between ”10” and “15”.
•  Is there sound?
Yes
The system is normal.
No
Go to the next step.
2
•  Turn the ignition switch to the LOCK position.
•  Remove the audio unit.
•  Disconnect the audio connector (24-pin).
•  Inspect the continuity between the audio unit wiring harness-side connector terminal and ground:
For front door speaker
―  Terminal A (L+) — GND
―  Terminal C (L-) — GND
―  Terminal D (R+) — GND
―  Terminal F (R-) — GND
For rear door speaker
―  Terminal S (L+) — GND
―  Terminal U (L-) — GND
―  Terminal V (R+) — GND
―  Terminal X (R-) — GND
―  Is there continuity?
Yes
Repair or replace the suspect wiring harness or speaker unit.
Note
•  If there is a short circuit between the speaker harness or speaker lead wire and ground, the protector circuit inside the audio unit operates to cut the sound.
No
Go to the next step.
3
•  Remove the speaker.
•  Disconnect the speaker connector (2-pin).
•  Inspect the continuity between the speaker wiring harness-side connector (2-pin) terminal and ground:
For each speaker
―  Terminal A — GND
―  Terminal B — GND
•  Is there continuity?
Yes
Replace the speaker.
No
Replace the audio unit.