SHROUD PANEL REMOVAL/INSTALLATION

id091000801900

1.  Disconnect the negative battery cable.

2.  Remove the front bumper. (SeeFRONT BUMPER REMOVAL/INSTALLATION.)

3.  Remove the front combination lights. (SeeFRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)

4.  Remove the front bumper reinforcement. (SeeFRONT BUMPER REINFORCEMENT REMOVAL/INSTALLATION.)

5.  Remove the bonnet latch. (SeeBONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION[L.H.D.],BONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION[R.H.D.].)

6.  Remove in the order indicated in the table.

am3zzw00002278

1	Radiator mount cap
2	Bolt A
3	Seal plate
4	Bolt B
5	Fastener
6	Air guide
7	Bolt C
8	Shroud panel

7.  Install in the reverse order of removal.