REAR DOOR UNIT REMOVAL/INSTALLATION

id091100800600

1.  Remove the following parts:

(1)  Sail garnish (5HB) (SeeSAIL GARNISH REMOVAL/INSTALLATION.)

(2)  Regulator handle (vehicles with manual window system) (SeeREGULATOR HANDLE REMOVAL.) (SeeREGULATOR HANDLE INSTALLATION.)

(3)  Rear door trim (SeeREAR DOOR TRIM REMOVAL/INSTALLATION.)

(4)  Rear door garnish (5HB) (SeeREAR DOOR GARNISH REMOVAL/INSTALLATION.)

(5)  Rear beltline molding (SeeREAR BELTLINE MOLDING REMOVAL/INSTALLATION.)

(6)  Rear door glass (SeeREAR DOOR GLASS REMOVAL/INSTALLATION.)

(7)  Rear door speaker (SeeREAR DOOR SPEAKER REMOVAL/INSTALLATION.)

2.  Remove the rod from the outer handle.

3.  Disconnect the rear door wiring harness connector.

4.  Remove tabs A and B, then remove the rear door wiring harness bracket.

am3zzw00002247

5.  Remove screws A, B, and the fastener.

am3zzw00002248

6.  Remove the rear door unit.

7.  Install in the reverse order of removal.