AUTO LEVELING CONTROL MODULE REMOVAL/INSTALLATION

id091800805500

1.  Disconnect the negative battery cable.

2.  Remove the decoration panel.(See DECORATION PANEL REMOVAL/INSTALLATION.)

3.  Remove the front scuff plate.(See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

4.  Remove the front side trim.(See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

5.  Remove the glove compartment.(See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

6.  Remove the PJB. (See PASSENGER JUNCTION BOX (PJB) REMOVAL/INSTALLATION.)

7.  Remove the car-navigation unit. (See CAR-NAVIGATION UNIT REMOVAL/INSTALLATION.)

8.  Disconnect the auto leveling control module connector.

am3zzw00001820

9.  Remove the screw, then remove the auto leveling control module.

10.  Install in the reverse order of removal.

11.  Perform the auto leveling system initialization. (See AUTO LEVELING SYSTEM INITIALIZATION.)