REAR BODY CONTROL MODULE (RBCM) BRACKET REMOVAL/INSTALLATION
id094000003000
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)
2. Remove the following parts:
- (1) Rear package tray (See REAR PACKAGE TRAY REMOVAL/INSTALLATION.)
-
- (2) Trunk covering (See TRUNK COVERING REMOVAL/INSTALLATION.)
-
- (3) Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)
-
- (4) Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)
-
- (5) Rear seat back (See REAR SEAT BACK REMOVAL/INSTALLATION.)
-
- (6) Rear scuff plate (LH) (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)
-
- (7) Tire house trim (LH) (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)
-
- (8) Trunk side upper trim (LH) (See TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION.)
-
- (9) Trunk side trim (LH) (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)
-
- (10) Rear body control module (RBCM) (See REAR BODY CONTROL MODULE (RBCM) REMOVAL/INSTALLATION.)
-
3. Remove the bolts.
4. Remove the screw.
5. Remove the rear body control module (RBCM) bracket.
6. Install in the reverse order of removal.
