NO.2 MIL ILLUMINATES [MZR 2.0, MZR 2.5]

id0103e1800800

2

MIL ILLUMINATES

DESCRIPTION

•  The MIL is illuminated incorrectly.

POSSIBLE CAUSE

•  The MIL illuminates for emission-related concern (DTC is stored in PCM)

•  Instrument cluster malfunction

•  PCM malfunction

Note

•  If the MIL blinks at steady rate, misfire condition could possibly exist.

2	MIL ILLUMINATES
DESCRIPTION	• The MIL is illuminated incorrectly.
POSSIBLE CAUSE	• The MIL illuminates for emission-related concern (DTC is stored in PCM) • Instrument cluster malfunction • PCM malfunction Note • If the MIL blinks at steady rate, misfire condition could possibly exist.

Diagnostic procedure

STEP	INSPECTION	RESULTS	ACTION
1	Connect the M-MDS to the DLC-2. Switch the ignition to ON (engine off). Retrieve any DTCs. (See ON-BOARD DIAGNOSTIC TEST [MZR 2.0, MZR 2.5].) Are any DTCs present?	Yes	Go to the appropriate DTC inspection. (See DTC TABLE [MZR 2.0, MZR 2.5].)
1		No	Inspect the instrument cluster operation. (See INSTRUMENT CLUSTER INSPECTION.)
2	• Verify the test results. ― If normal, return to diagnostic index to service any additional symptoms. (See SYMPTOM DIAGNOSTIC INDEX [MZR 2.0, MZR 2.5].) ― If malfunction remains, inspect related Service Information and perform repair or diagnosis. • If vehicle is repaired, troubleshooting completed. • If vehicle is not repaired or additional diagnostic information is not available, replace the PCM. (See PCM REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)