DRIVE BELT AUTO TENSIONER INSPECTION [MZR 2.3 DISI Turbo]

id0110d9801700

1.  Remove the aerodynamic under cover No.2 and splash shield as a single unit. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.) (See SPLASH SHIELD REMOVAL/INSTALLATION.)

2.  Remove the drive belt. (See DRIVE BELT REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)

3.  Verify that the drive belt auto tensioner moves smoothly in the operational direction.

am3uuw00006065

•  Replace the drive belt auto tensioner if necessary. (See ENGINE DISASSEMBLY/ASSEMBLY [MZR 2.3 DISI Turbo].)

4.  Rotate the drive belt auto tensioner pulley by hand and verify that it rotates smoothly.

•  Replace the drive belt auto tensioner if necessary. (See ENGINE DISASSEMBLY/ASSEMBLY [MZR 2.3 DISI Turbo].)

5.  Install the drive belt. (See DRIVE BELT REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)

6.  Install the aerodynamic under cover No.2 and splash shield as a single unit. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.) (See SPLASH SHIELD REMOVAL/INSTALLATION.)