DRIVE BELT AUTO TENSIONER INSPECTION [MZR 1.5, MZR 1.6]

id0110s1801700

1.  Remove the aerodynamic under cover No.2 and splash shield as a single unit. (See AERODYNAMIC UNDER COVER NO.2 REMOVAL/INSTALLATION.) (See SPLASH SHIELD REMOVAL/INSTALLATION.)

2.  Remove drive belt. (See DRIVE BELT REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].)

3.  Verify that the drive belt auto tensioner moves smoothly in the operational direction.

•  If it does not move smoothly, replace the drive belt auto tensioner.

am3zzw00008245

4.  Rotate the drive belt auto tensioner pulley by hand and verify that it rotates smoothly.

•  If it does not move smoothly, replace the drive belt auto tensioner.

5.  Install the drive belt. (See DRIVE BELT REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].)