ACCELERATOR PEDAL (APP) REMOVAL/INSTALLATION [MZ-CD 1.6]

id011319805200

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].)

3.  Remove the dashboard under cover (if equipped). (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

4.  Remove the driver-side lower panel. (See LOWER PANEL REMOVAL/INSTALLATION.)

5.  Remove in the order indicated in the table.

am3zzw00009769

1	APP sensor connector
2	Accelerator pedal

6.  Install in the reverse order of removal.