GLOW PLUG CORD INSPECTION [MZR-CD 2.2]

id0113f3807100

Note

•  When inspecting for continuity in the glow plug cord, do not let the uncovered parts (A) come into contact with other parts and be shorted.

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].)

2.  Remove the engine cover. (See ENGINE COVER REMOVAL/INSTALLATION [MZR-CD 2.2].)

3.  Remove the dipstick pipe. (See CYLINDER HEAD GASKET REPLACEMENT [MZR-CD 2.2].)

4.  Remove the EGR cooler bypass valve control solenoid valve bracket No.1. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR-CD 2.2].)

5.  Remove the glow plug cord. (See GLOW PLUG REMOVAL/INSTALLATION [MZR-CD 2.2].)

6.  Verify that the glow plug cord is not broken or bent.

7.  Verify there is continuity at both ends of the glow plug cord.

am6zzw00004122

•  If there is no continuity, replace the glow plug cord. (See GLOW PLUG REMOVAL/INSTALLATION [MZR-CD 2.2].)