FUEL INJECTOR INSPECTION [SKYACTIV-G 2.0]


id0114z5800700


Resistance Inspection

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

3.  Remove the plug hole plate. (See PLUG HOLE PLATE REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

4.  Disconnect the fuel injector connector.

5.  Inspect the resistance between fuel injector terminals A and B.

am3zzw00012521

Fuel injector resistance
1.6—2.52 ohms [Surrounding temperature: 0—80 °C {32—176 °F}]
•  If not within the specification, replace the fuel injector. (See FUEL INJECTOR REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)