CHARCOAL CANISTER REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo]

id0116f3096400

1. Remove in the order indicated in the table.

am3zzw00012221

2. Install in the reverse order of removal.

Charcoal Canister Removal Note

1. Remove the rear stabilizer. (See REAR STABILIZER REMOVAL/INSTALLATION.)

2. Remove the rear coil spring. (See REAR COIL SPRING REMOVAL/INSTALLATION.)

3. Remove the rear lower arm. (See REAR LOWER ARM REMOVAL/INSTALLATION.)

4. Remove the rear crossmember component. (See REAR CROSSMEMBER REMOVAL/INSTALLATION.)

5. Remove the charcoal canister.

Charcoal Canister Bracket Removal Note

Note

• The charcoal canister bracket is installed using rivets.

1. Push out the mandrel using a hammer and punch (2—2.8 mm {0.08—0.11 in} diameter).

am3uuw00002780

2. Remove the flange using a drill (5 mm {0.20 in} drill bit).

ar8uuw00001479

1	Evaporative hose
2	Quick release connector (See QUICK RELEASE CONNECTOR (EMISSION SYSTEM) REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].)
3	Charcoal canister (See Charcoal Canister Removal Note.)
4	Charcoal canister bracket (See Charcoal Canister Bracket Removal Note.)