INTAKE AIR TEMPERATURE (IAT) SENSOR INSPECTION [MZR 2.0, MZR 2.5]

id0140e4802200


Resistance Inspection

Note
•  Because the IAT sensor is integrated in the MAF sensor, replacing the IAT sensor includes replacement of the MAF/IAT sensor.

1.  Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

2.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

3.  Disconnect the MAF/IAT sensor connector.

4.  Measure the resistance between MAF/IAT sensor terminals D and E.

am3zzw00011823

•  If not as specified, replace the MAF/IAT sensor. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].)

Specification

IAT (°C {°F})

Resistance (kilohms)
20 {68}
2.21—2.69
60 {140}
0.493—0.667