DTC U0415:68 [REAR VEHICLE MONITORING SYSTEM]
id0902z2885500
|
DESCRIPTION |
Error signal from DSC HU/CM |
|---|---|
|
DETECTION CONDITION
|
• Rear vehicle monitoring control module (RH) receives the error signal from DSC HU/CM for 1 s or more.
|
|
POSSIBLE CAUSE
|
• DSC HU/CM DTC is stored.
• DSC HU/CM malfunction
• Rear vehicle monitoring control module (RH) malfunction
|
Diagnostic Procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
CONFIRM DSC HU/CM DTC
• Perform the DSC HU/CM DTC inspection using the M-MDS.
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
Go to the next step.
|
||
|
2
|
PERFORM DTC INSPECTION AND VERIFY THAT MALFUNCTIONING PART IS DSC HU/CM
• Clear the DTC from rear vehicle monitoring control module using the M-MDS.
• Switch the ignition to ON and wait for 1.5 s or more.
• Perform the rear vehicle monitoring control module DTC inspection using the M-MDS.
• Is the same DTC present?
|
Yes
|
Replace the DSC HU/CM, then go to the next step.
|
|
No
|
Go to Step 4.
|
||
|
3
|
VERIFY TROUBLESHOOTING COMPLETED
• Clear the DTC from rear vehicle monitoring control module using the M-MDS.
• Switch the ignition to ON and wait for 1.5 s or more.
• Perform the rear vehicle monitoring control module DTC inspection using the M-MDS.
• Is the same DTC present?
|
Yes
|
Replace the rear vehicle monitoring control module (RH), then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY THAT NO OTHER DTCs ARE PRESENT
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||