No.1 AFS OFF INDICATOR LIGHT ILLUMINATES CONTINUOUSLY [AFS (ADAPTIVE FRONT LIGHTING SYSTEM)]
id0903h9914600
1
|
The AFS OFF indicator light illuminates continuously
|
DESCRIPTION
|
The AFS OFF indicator light remains illuminated with the ignition switched ON and the AFS does not operate.
|
POSSIBLE CAUSE
|
• Constant AFS OFF signal malfunction to the AFS control module.
• AFS control module malfunction
• Instrument cluster malfunction
|
Diagnostic Procedure
Step |
Inspection |
Action |
|
---|---|---|---|
1
|
INSPECT IF MALFUNCTION IS IN AFS OFF SWITCH
• Switch the ignition off.
• Disconnect the AFS OFF switch connector.
• Switch the ignition ON.
• Verify that the AFS OFF indicator light illuminates.
• Does the AFS OFF switch illumination turn off after illuminating for several seconds directly after the ignition is switched ON?
|
Yes
|
Replace the AFS OFF switch.
|
No
|
Go to the next step.
|
||
2
|
INSPECT AFS OFF SWITCH SIGNAL WIRING HARNESS
• Disconnect the AFS control module connector.
• Verify the continuity between AFS OFF switch terminal H and body ground.
• Is there continuity?
|
Yes
|
Repair for a short circuit to the wiring harness ground between AFS OFF switch terminal H and AFS control module terminal P.
|
No
|
Go to the next step.
|
||
3
|
INSPECT AUTO LEVELING SENSOR SIGNAL CIRCUIT
• Verify the continuity between AFS control module terminal E and body ground.
• Is there continuity?
|
Yes
|
Repair or replace the related wiring harness.
|
No
|
Go to the next step.
|
||
4
|
INSPECT INSTRUMENT CLUSTER
• Turn off the AFS OFF indicator light using the instrument cluster active command modes WL + IL and the M-MDS.
• Does the AFS OFF indicator light turn off with the simulation operation?
|
Yes
|
Replace the AFS control module.
|
No
|
Replace the instrument cluster.
|