TRUNK LID LATCH SWITCH INSPECTION

id091400513600

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].) (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].) (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].)

2.  Remove the trunk lid trim. (See TRUNK LID TRIM REMOVAL/INSTALLATION.)

3.  Remove the trunk lid latch and lock actuator. (See TRUNK LID LATCH AND RELEASE ACTUATOR REMOVAL/INSTALLATION.)

4.  Press the latch in using a flathead screwdriver to inspect the latch lever condition.

am3uuw00004546

5.  Verify that the continuity is as indicated in the table.

am6zzw00001896

•  If not as indicated in the table, replace the trunk lid latch and release actuator.

am3uuw00004521