HAZARD WARNING SWITCH REMOVAL/INSTALLATION

id091800803000

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].) (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].) (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].) (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

2.  Remove the center panel. (See CENTER PANEL REMOVAL/INSTALLATION.)

3.  Remove in the order indicated in the table.

am3uuw00003117

1	Screw
2	Hazard warning switch

4.  Install in the reverse order of removal.