VANITY MIRROR ILLUMINATION BULB REMOVAL/INSTALLATION

id091800808200

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].) (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].) (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].) (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

2.  Insert a tape-wrapped screwdriver into the service hole, and pry it in the direction indicated by the arrow to remove the lens.

am3uuw00002442

3.  Remove the vanity mirror illumination bulb.

am3uuw00002443

4.  Install in the reverse order of removal.