MAP LIGHT BULB REMOVAL/INSTALLATION

id091800812500

1.  Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [MZR 2.0, MZR 2.5].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.3 DISI Turbo].) (See BATTERY REMOVAL/INSTALLATION [MZR 2.0 DISI i-stop].) (See BATTERY REMOVAL/INSTALLATION [MZ-CD 1.6].) (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].) (See BATTERY REMOVAL/INSTALLATION [MZR 1.5, MZR 1.6].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 2.0].)

2.  Insert a tape-wrapped screwdriver into the service hole and pry with the screwdriver in the direction shown by the arrow to remove the lens.

am3uuw00008115

3.  Remove the map light bulb.

am3uuw00007808

4.  Install in the reverse order of removal.